Water Hardness in Riverton, Wyoming
The water hardness in Riverton, WY is 220 ppm (12.9 grains per gallon), which is classified as Hard . Water in Riverton is supplied by City of Riverton and comes primarily from underground aquifer and well water sources. At this hardness level, a water softener is recommended to protect your plumbing, appliances, and improve daily water quality. Without treatment, hard water at 220 ppm costs the average household an estimated $10 per year in extra expenses.
Water Quality Details for Riverton, WY
What 220 PPM Means for Your Home in Riverton
At 220 ppm, Riverton's water is classified as hard. At this level, scale buildup is a serious concern. You will see heavy white deposits on faucets, showerheads, and inside your kettle. Your water heater is losing efficiency rapidly as scale insulates the heating element — this alone can increase your energy bill by 25 percent or more. Dishwashers leave cloudy residue on glasses, washing machines require extra detergent, and soap scum accumulates quickly in showers and tubs. Skin and hair may feel dry after bathing. A water softener is strongly recommended for Riverton residents at this hardness level. The investment typically pays for itself within two years through reduced energy costs, lower soap and detergent usage, and extended appliance lifespan.
Water Source and Treatment at City of Riverton
Riverton's water is supplied by City of Riverton and sourced primarily from underground aquifers accessed through deep wells. Groundwater has been naturally filtered through rock and soil, which makes it generally free of biological contaminants but higher in dissolved minerals. The 220 ppm hardness in Riverton results from water percolating through limestone, chalk, or dolomite formations underground, dissolving calcium and magnesium along the way. The water has a pH of 7.8, which is slightly alkaline, and total dissolved solids of 350 ppm (elevated).
Estimated Cost of Hard Water in Riverton
The Water Quality Association estimates that hard water costs the average household about 30 cents per grain per gallon per person per year in combined expenses from increased soap and detergent usage, reduced appliance efficiency, higher energy bills from scale-encrusted water heaters, and premature appliance and plumbing replacement. For a typical Riverton household of 2.5 people with water at 220 ppm (12.9 gpg), this translates to approximately $10 per year. Over 10 years, that adds up to $97 in avoidable costs — often more than the total cost of installing and operating a water softener.
Recommended Treatment Solutions for Riverton
Based on the water hardness of 220 ppm in Riverton, the following treatment options are recommended, ranked by effectiveness for your specific hardness level.
Salt-Based Water Softener
$800 - $2,500 Effectiveness: High Removes minerals Learn more →Salt-Free Water Conditioner
$1,000 - $3,000 Effectiveness: Moderate Conditions only Learn more →Reverse Osmosis System
$200 - $500 Effectiveness: High Removes minerals Learn more →Electronic Descaler
$150 - $400 Effectiveness: Moderate Conditions only Learn more →Other Cities in Wyoming
Compare Riverton's water hardness with other cities in Wyoming. Water hardness can vary significantly within a state depending on local geology and water sources.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Riverton | 220 ppm | 12.9 | Hard | Ground |
| Gillette | 280 ppm | 16.4 | Very Hard | Ground |
| Rock Springs | 240 ppm | 14 | Hard | Ground |
| Sheridan | 200 ppm | 11.7 | Hard | Mixed |
| Casper | 180 ppm | 10.5 | Moderately Hard | Surface |
| Cody | 165 ppm | 9.6 | Moderately Hard | Surface |
| Laramie | 150 ppm | 8.8 | Moderately Hard | Mixed |
| Cheyenne | 125 ppm | 7.3 | Moderately Hard | Mixed |
Test Your Water for Accurate Results
The hardness value shown for Riverton (220 ppm) is based on the most recent available data from City of Riverton. Your actual water hardness may vary depending on your neighborhood, the age of your plumbing, and seasonal changes in water supply. For the most accurate measurement, we recommend testing your tap water with a home test kit or requesting a current water quality report from City of Riverton. Visit our hardness scale guide to understand what your test results mean, or explore all treatment solutions to find the right option for your home.