Water Hardness in Clarksville, Tennessee
The water hardness in Clarksville, TN is 110 ppm (6.4 grains per gallon), which is classified as Slightly Hard . Water in Clarksville is supplied by Clarksville Gas and Water and comes primarily from surface water sources such as rivers, lakes, and reservoirs. While a water softener is not strictly necessary at this hardness level, some homeowners in Clarksville opt for a conditioner to reduce minor spotting and improve soap performance.
Water Quality Details for Clarksville, TN
What 110 PPM Means for Your Home in Clarksville
At 110 ppm, Clarksville's water is classified as slightly hard. You may notice minor water spots on dishes and glassware after they dry, and there might be a thin film on glass shower doors over time. However, these effects are cosmetic rather than damaging. Your plumbing and appliances are not at significant risk of scale damage at this level. Most households in Clarksville operate perfectly well without a water softener. If the minor spotting bothers you, a simple rinse aid in your dishwasher or an occasional vinegar wipe on fixtures is usually sufficient. Some homeowners with sensitive skin or eczema may still prefer a softener for bathing comfort.
Water Source and Treatment at Clarksville Gas and Water
Clarksville's water is supplied by Clarksville Gas and Water and sourced primarily from surface water bodies including rivers, lakes, and reservoirs. Surface water typically requires more treatment for biological contaminants (bacteria, algae, sediment) but tends to have lower mineral content than groundwater. The hardness level of 110 ppm in Clarksville reflects the mineral content picked up as water flows through local watershed geology before reaching the treatment plant. The water has a pH of 7.4, which is near neutral, and total dissolved solids of 170 ppm (moderate).
Estimated Cost of Hard Water in Clarksville
The Water Quality Association estimates that hard water costs the average household about 30 cents per grain per gallon per person per year in combined expenses from increased soap and detergent usage, reduced appliance efficiency, higher energy bills from scale-encrusted water heaters, and premature appliance and plumbing replacement. For a typical Clarksville household of 2.5 people with water at 110 ppm (6.4 gpg), this translates to approximately $5 per year. Over 10 years, that adds up to $48 in avoidable costs — often more than the total cost of installing and operating a water softener.
Recommended Treatment Solutions for Clarksville
Based on the water hardness of 110 ppm in Clarksville, the following treatment options are recommended, ranked by effectiveness for your specific hardness level.
Other Cities in Tennessee
Compare Clarksville's water hardness with other cities in Tennessee. Water hardness can vary significantly within a state depending on local geology and water sources.
| City | Hardness (PPM) | GPG | Level | Source |
|---|---|---|---|---|
| Clarksville | 110 ppm | 6.4 | Slightly Hard | Surface |
| Murfreesboro | 170 ppm | 9.9 | Moderately Hard | Ground |
| Franklin | 145 ppm | 8.5 | Moderately Hard | Ground |
| Nashville | 100 ppm | 5.8 | Slightly Hard | Surface |
| Knoxville | 90 ppm | 5.3 | Slightly Hard | Surface |
| Chattanooga | 80 ppm | 4.7 | Slightly Hard | Surface |
| Johnson City | 65 ppm | 3.8 | Slightly Hard | Surface |
| Memphis | 60 ppm | 3.5 | Soft | Ground |
Test Your Water for Accurate Results
The hardness value shown for Clarksville (110 ppm) is based on the most recent available data from Clarksville Gas and Water. Your actual water hardness may vary depending on your neighborhood, the age of your plumbing, and seasonal changes in water supply. For the most accurate measurement, we recommend testing your tap water with a home test kit or requesting a current water quality report from Clarksville Gas and Water. Visit our hardness scale guide to understand what your test results mean, or explore all treatment solutions to find the right option for your home.